Automatic Touchless Sensor Faucet Head

The Automatic Touchless Sensor Faucet Head from Wellspring turns an ordinary tap into a hands-free one. Infrared sensors sit on the side and bottom of the head, so when you move your hands into range the water flows within 0.1 seconds and shuts off as soon as you pull away. There is nothing to touch and no handle to turn, which keeps the spout cleaner and cuts down on wasted water.

The body is A-grade brass with a ceramic valve core, and it works with both hot and cold water. Air is mixed into the stream to give a fine, soft flow of about 0.7 litres per second at 0.1 MPa water pressure with very little splashing. Power comes from a built-in rechargeable battery that takes about 1.5 hours to fully charge and runs for up to 12 months between charges, with low-battery protection built in.

It comes in chrome-plated and brushed finishes. Wellspring describes both a fixed spout and a 360-degree adjustable pumping version, but the only choice shown on this listing is the finish, so confirm which spout type you are getting. Exact dimensions, the thread or connection size, and the charging method are not listed here, so check the fit against your existing faucet before you buy.

Key features

• Infrared dual sensors (side and bottom) release water within 0.1 seconds and stop when you remove your hands
• A-grade brass body with a ceramic valve core; works with both hot and cold water
• Aerated flow of about 0.7 litres per second at 0.1 MPa for a soft stream with minimal splashing
• Built-in rechargeable battery: roughly 1.5 hours to a full charge, up to 12 months of use
• Low-battery (weak current) protection to help preserve the battery
• Available in chrome-plated and brushed finishes